How will you apply HS-50 High Pressure tubing?

From replacing machined bar in fittings to allowing for higher pressures in assemblies, engineers are using HS-50™ in a variety of hydraulic applications.With mechanical properties equivalent to SAE J2614 Type-A, HS-l™ is a cost effective culling that provides:

the STRENGTH of college alloy steel

the FORMABILITY of J525

the CONFIDENCE to braze

the CONSISTENCY that Plymouth's products are known for.

With a minimum yield strength of 50,000 psi (345 Mpa) and 30% minimum elongation, HS-fifty™ allows the system designer to design for higher system pressures while reducing overall system weight.

Contact united states of america today to learn more nearly HS-50™! Sales@plymouth.com or 630-393-3550

Advantages

  • Design for higher system pressures
  • Reduce overall organisation weight
  • Reduce fluid turbulence and menstruum velocity
  • Ameliorate fluid flow book
  • Reduce system heat generation

Product Data

Size Range

OD: 0.375" – 1.625"

Wall: 0.035" – 0.120"

Max Length: 26'

Mechanical Requirements:

Yield Force: 345 Mpa min (fifty,025 psi min)

Tensile Strength: 500 Mpa min (72,500 psi min)

Elongation: 30% min

Chemical Limerick

APPLICATIONS & MARKETS

  • Hydraulic Applications

  • Hydraulic Applications

Hydraulic Applications

HS-50™ High Pressure level Hydraulic Tubing can be used anywhere high strength depression alloy tubing is required.  HS-l is a smashing alternative to J525 or seamless hydraulic tubing in fittings and fluid lines.